Visualizers
Visualizers
- PLEASE NOTE
- Depending on the school, the secretary or technology facilitator is responsible for contacting Avermedia to initiate equipment exchanges due to faulty equipment.
- Locate Purchase Order from Secretary prior to contacting Avermedia Support.
- Customer Service: 877-528-7824
- Registration
- Support
- More information
- Presentation Notes
- NOTE: 5 year warranty, the 1st year, any problems….avermedia rushes you a new camera while yours is in transit. The other 4 years will incur a time delay of receiving your camera to check it out prior to shipping a new one if it is needed. Usually there is no cost to repair doc cams if they break down….unless it is broken by your folks while being used….dropped, stepped on, lost power supply….etc.
- CP300 (AverMedia): 5 year warranty
- SPC300 (AverMedia): 5 year warranty
- 300 (Avermedia: 3 year warranty, How to fix the focus-ability of lens.
- 530 (AverMedia): 5 year warranty
Trouble Shooting Visualizer Problems
If the visualizer begins projecting a pixelated gray fuzz, try this troubleshooting.doc or look in Serviceware.
- Verify all of that all of the cords for the visualizer and projector are securely in place.
- Make sure the lens cap is OFF
- Pull the power cord out of the visualizer and then reattach.
Make sure the switch is set to RGB- Resuming Default Settings - SPC300 ONLY
- press MENU, then default setting
- press MENU, then ADVANCE, then EXPOSURE, then FLICKER, then try 50 or 60 to see if it makes any difference.
- If that doesn’t solve it, contact Avermedia’s Support team.
FAQ’s
How can I use the Visualizer with Instruction?- 101 Ways to use the Visualizer with Instruction (.doc)
- Visualizer Integration with Instruction (.doc) This document is from…
No. The visualizer doesn’t create much heat and the parts do not wear out quickly, if ever.Should I turn off (or hibernate) the projector between uses?
Yes. The projector bulbs are expensive ($350 or so) and will where out more quickly with prolonged use. They also get extremely hot and this will also shorten its life span.How do Import images into my computer and/or ActivStudio? Try this. How often should I blow the dust out of my projector’s filter?
The filter should be cleaned at least monthly, if not bi-weekly. Schools tend to be very dusty. The dust clogs the projector’s filter which causes the projector to overheat. This shortens it’s life span.
Manuals
Visualizers: 300p.pdf, 530.pdf, spc300.pdf
Projectors: cp-x251_um.pdf, epson_powerlite62c_ug.pdf, epson_powerlite_76c.pdf

Entries (RSS)